If you’ve been following Pi Supply over the last few months, you’ll have noticed that we’ve been extremely busy with three Kickstarters: PiJuice, PaPiRus, and Pi PoE. Each of them are unique, and have a variety of useful applications. When we were promoting the PiJuice module, we decided that having specific project guides for people […]
Please note that this page has now been superseded by the Bright Pi Quickstart and FAQ page. When you purchased your Bright Pi v1.0 kit, you should have received an anti-static bag with some components in it which will require soldering together in order to get the Bright Pi up and running and connected to your […]
The Short Crust sase is an elegant and well thought out case for your Raspberry Pi, which affords you a fantastic amount of protection for your beloved little computer. The Short Crust case is very easy to put together, but we have created a step-by-step guide below (with videos) to assist you in assembling the […]
Please find below the assembly instructions for the Pi Supply Switch v1.1. We will soon have a full picture guide here, but until then the following are the positions. The PCB is labelled with the component positions. We recommend you assemble them in this order: R1 and R2: Resistor 22k R3 and R4: Resistor 10k […]