As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and portable. Introducing PiJuice! A fully uninterruptable power supply that will always keep your Raspberry Pi powered. This guide will show you how to assemble the PiJuice HAT, set it up […]

This guide will show you how to assemble your PiJuice case with your Raspberry, PiJuice and any additional HAT you may wish to stack, whilst highlighting some of its additional features. The PiJuice Short Case is the prefect enclosure for the PiJuice HAT and the Raspberry Pi. It has been designed so that it can […]

PiJuice HAT and pHAT are a great portable power solution to your Raspberry Pi projects. However, your Raspberry Pi may be in a remote location or you may find yourself not having physical access to the Raspberry Pi and its important to keep tabs on how it performing especially when you find that your primary […]

This project will show you how to use the PiJuice HAT to power separate device other than the Raspberry Pi. In this project we are going to use the PiJuice HAT to power a motor controller board, but you can use to power other devices such as MCU’s. In this project we are going to […]

In this guide we will show you how to put together the famous NatureBytes Wildlife Cam Case so that it runs a Raspberry Pi completely off grid running off the PiJuice. This specific project has been designed to run using the PiJuice Zero which will be available for purchase shortly. This project requires the PIR to […]

The PiJuice Maker Kit case is designed to house the Raspberry Pi, PiJuice HAT and Media centre HAT all in one neat little case. With the addition of the media centre HAT it opens up the possibilities to create amazing project that are portable, wireless and easy to interface with using the touchscreen display. We […]

The Point and Shoot Camera Kit uses a combination of the PiJuice HAT, Media Center HAT and Raspberry Pi camera board to create a touch screen standalone camera all housed in the PiJuice Maker Kit Case. This project is designed to highlight the features of the PiJuice HAT as well as the new Media Center […]

The PiJuice is a great addition to any project, and now even more so since we have shrunk down the PiJuice HAT into a pHAT form factor to suit the Raspberry Pi Zero. Keeping all the same functionality of the HAT but excluding some buttons, headers etc we also added a neat battery connector allowing […]

We now stock a number of PiJuice batteries with various capacity to suit all of your PiJuice power needs. All the batteries in our store are Lithium Polymer and come with a 3-pin JST connector and a charging protection circuit built-in. Note: Whilst every effort has been made to ensure the safety of these batteries […]

PiJuice Games Console Project This project will show you how to build a portable games console using the PiJuice and Media Center HAT. You will be able to play all of your Retro games anywhere with the PiJuice portable battery solution, combined with the Media Center HAT and a Bluetooth controller housed in a case, […]